You can use the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf - Black # LC95VR to replace the hinges on your door.
They come in a quantity of 1 so you will need to make sure that you buy enough to support your door. view full answer...
In order to add the grid lines to your Voyager RV Backup Camera w/ Night Vision - Rear Mount # VGR84VR you are going to need to get into the menu screen on your monitor like # VO34FR, and through the settings you'll just need to toggle the marker lines ON/OFF.
You can find more information on page 6 of the owner's manual, or you can check out the attached image. view full answer...
For a Kwikee 28 Series Steps # LC3747453 on your 2016 Thor Palazzo 33.2 you will need the Replacement Gear Box and B Linkage # LC379161 and the Replacement Motor # LC379147. We also have the Replacement Control Unit # LC379146 if you need that as well. view full answer...
The Roadmaster # RM-1209-139 Front Anti-Sway you'd looked at is indeed a fit for your 2019 Thor Palazzo 36.3 which was built on a Freightliner XC chassis. I've linked to a product description video featuring the anti-sway bar. view full answer...
The Curt Echo Mobile Trailer Brake Controller - Wireless # C51180 can be hard mounted to the trailer but it cannot have any flop or movement of the unit because it is inertia based and needs to be able to find the consistent point to monitor movement from. The direction of the controller isn't an issue so if mounted to the side frame at an angle is okay. You can use an extension like the Curt Universal 5th Wheel/Gooseneck 7-Way Extension - 7' Long # C56080 which can be shortened or coiled... view full answer...
The Roadmaster Tow Bar Cover # RM-055-3 is only designed to fit various Roadmaster Tow Bars, like the Roadmaster Falcon All Terrain # RM-522 that you mention, however it will also not fit your Roadmaster Tow Defender Protective Screening # RM-4700.
The Roadmaster Tow Defender Protective Screening # RM-4700 does however, roll-up when it's not being used, and stores against the rear of the RV, measuring only 4" wide, and 40" long.
Roadmaster does not offer a cover that will work with your... view full answer...
That small hole that you are seeing on the Phoenix Faucets Catalina RV Shower Valve w/ Vacuum Breaker # PF223304 and other RV specific showers is actually a part of the vacuum breaker. The vacuum breaker is where you would hook up the shower heard and is designed with that small hole in order to prevent backflow contamination of your clean water supply. view full answer...
The correct Roadmaster Reflex Steering Stabilizer for a 2017 Thor Palazzo Motorhome on a Freightliner XC-Series Chassis is part # RM-RBK18-RSSA. view full answer...
The ClearPlus 77 Series HD Windshield Wiper Blades like part # CP77321 are great windshield wipers for motorhomes. That said, if the rubber becomes worn or damaged you would need to replace the entire unit as the rubber is no something that can be replaced. I am not aware of any windshield wipers for motorhomes with this refillable feature you referenced. view full answer...
It sounds like you might be looking to replace a Ventline Roof Vent V2094 and if that is the case we do have the correct one, the Ventline Ventadome Trailer Roof Vent part # V2094SP-28. That said, you also will need the Ceiling Garnish for Ventline Roof Vent part # VA0445-28 (trim to fit) due to the roof thickness.
If this was not the info you were looking for please just let me know. view full answer...
We have two different styles available that will fit, the Curt Tri-Ball Trailer Coupler Lock, # C48CR and the Master Lock Trailer Coupler Lock , # 379DAT that will fit your 2-5/16" coupler. We do not currently have an option available that encases a coupler that is 5". view full answer...
Typically on a Freightliner Chassis like the one under your 2019 Thor Palazzo class A the air suspension is specifically designed for your chassis weight capacity and there are not different weight capacity springs available. As this is more of a chassis manufacturer part I recommend contacting Freightliner with your frame tag information as they will be able to help you determine the best way to raise your rear suspension. view full answer...
We actually have a boat guide on that was designed for pontoon boat trailers with the part # CE27670 which is better designed for the frame styles of pontoon boat trailers. The # CE27760 wouldn't work as it would need a different frame style. view full answer...
To replace your Coleman Mach AC unit the Advent Air Replacement Unit for Coleman Setups part # ACCOL135 would be a great option as this is a 13.5k BTU unit as it was designed to replace Coleman setups so it would be a really easy install that uses same wiring connections. Then to add some heat to it you would also want the heat strip part # ACMHD and you'd be set. view full answer...
The Roadmaster D-Ring adapters like the part # RM-035 can be used with the Demco tow bars like you have so you already have everything you need! view full answer...
I wouldn't have much advice on retrofitting but we do offer replacement upright masts and replacement ratcheting hooks for said mast for certain carriers. The Replacement Upright Ratchet Assembly part # SP530 with Replacement Locking Long and Short Hooks part # SP428 could be a suitable option for your needs. view full answer...
I've attached a little diagram displaying the dimensions of the Buyers Products Rocker Switch # 3373014187 below. If you need any other dimensions or have more questions just let me know. view full answer...
Thanks for the picture!
I took a look at what we got for your 2018 Thor Palazzo Motorhome, and it appears you need the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System # LC324269.
This replacement will replace the foot pad for your Lippert hydraulic ground control leveling system, and includes O-rings, the washer, and bolt for installation. view full answer...
The curb weight of your 2009 Toyota Camry XLE is 3,373 lbs and it has 12-16 inch tires. With this combination, the Roadmaster Tow Dolly with Electric Brakes - 4,250 lbs # RM-2050-1 will be sufficient.
If it were me, I'd go with the Roadmaster # RM-2050-1 and use 7-way Pollak Connector # PK12706 to finish the connection on the dolly. I've attached a few videos to help. view full answer...